Shop By
Categories

EXTERNAL D.C SHUNTS


STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 10

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹200.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 100

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹520.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 1000

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹2,600.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 1200

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹3,200.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 15

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹210.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 150

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹600.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 1500

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹4,000.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 20

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹250.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 200

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹700.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 2000

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹4,500.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 25

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹260.00

STANDARD EXTERNAL D.C.SHUNTS (WITH 75.MV DROPS) CLASS 1.0 AMP 250

The D.C. Shunt (or ME shunts) available with us are ideal for current ratings from 5 to 10000 Amps and mill volt drops of 75 millivolts. The product conforms to IS Standards 1248 and is provided with leads of 0.025 ohms. Some of its construction features are cited below:It consists of Mangenin rods, soldered or silver brazed, to brass end blocks.It is artificially aged after manufacture; followed by tests on full load.Lead resistance is considered while calibrating the instrumentSalient features of the ME Shunts are as follows:Class 1 accuracyTemperature Co-Efficient0.002% per degree centigrade, above ambient temperature in still air, with free ventilationTemperature not exceeding 120°C at the center and 90°C at the endsThe ME Shunts withstand temperatures up to 120oC; without any permanent alterations in physical or electrical propertiesOverloads and faults due to high temperatures (>120oC) can be safely handledAll 75 millivolts drop shunts of class 1, withstand the following overl..

₹750.00

Showing 1 to 12 of 25 (3 Pages)